1
- 13 -
951-171-236
Version 01
EN
1. Safety instructions
1.19 Residual risks
Residual risk
Possible in life cycle
Prevention/ remedy
Personal injury/ material damage due to
falling of raised parts
A B C
G H K
Keep unauthorized persons away. No people may remain under suspended loads. Lift
parts with adequate lifting devices.
Personal injury/ material damage due to
tilting or falling of the product because of
non-observance of the stated tightening
torques
B C
G
Observe the specified tightening torques. Fix the product to components with ad-
equate load-bearing capacities only. If no tightening torques are stated, apply tight-
ening torques according to the screw size characteristics for 8.8 screws.
Personal injury/ damage to material due
to spilled or leaked lubricant
B C D
F G H K
Be careful when filling the reservoir and when connecting or disconnecting lubricant
feed lines. Always use suitable hydraulic screw connections and lubrication lines
for the stated pressures. Do not mount lubrication lines to moving parts or friction
points. If this cannot be avoided, use spring coils respectively protective conduits.
Life phases:
A = transport, B = installation, C = initial start-up, D = operation, E = cleaning, F = maintenance, G = fault, repair, H = shutdown, K = Disposal
