1
- 9 -
951-180-087-EN
Version 01
EN
1. Safety instructions
1. Safety instructions
1.1 General safety instructions
○
The operator must ensure that the in-
structions are read by all persons tasked
with working on the product or who
supervise or instruct such persons. The
operator must also ensure that the staff
fully understands the content of the in-
structions. Putting the products into op-
eration or operating them without having
read the instructions is prohibited.
○
Retain the instructions for further use.
○
The products described here was
manufactured according to the state of
the art. Risks may, however, arise from
non-compliant usage and may result in
personal injury or damage to material
assets.
○
Any malfunctions which may affect safety
must be remedied immediately. In ad-
dition to these instructions, the statu-
tory regulations for accident prevention
and environmental protection must be
observed.
○
The risk analysis of the workstation must
assess the hazard arising from contact
with hot surfaces, among other risks. If
there is a risk of burns, appropriate pro-
tective measures must be taken.
1.2 General behavior when handling the
product
○
The product may only be used in aware-
ness of the potential dangers, in proper
technical condition, and according to the
information in this manual.
○
Familiarize yourself with the functions
and operation of the product. The speci-
fied assembly and operating steps and
their sequences must be observed.
○
Any unclear points regarding proper
condition or correct assembly/operation
must be clarified. Operation is prohibited
until issues have been clarified.
○
Unauthorized persons must be kept
away.
○
Wear personal protective equipment.
○
All safety regulations and in-house
instructions relevant to the particular
activity must be observed.
○
Never use any part of the centralized
lubrication system as a stand or step or
for climbing.
○
Responsibilities for different activities
must be clearly defined and observed.
Uncertainty seriously endangers safety.
○
Protective and safety mechanisms must
not be removed, modified, nor disabled
during operation and must be checked
