1
- 19 -
951-180-087-EN
Version 01
EN
1. Safety instructions
○
Any additional electrical monitoring
equipment must be securely connected
and correctly configured.
1.21 Nulliication of ATEX approval
The ATEX approval is nullified by:
○
Improper usage
○
Unauthorized alterations
○
Use of non-original SKF spare/replace-
ment components
○
Failure to comply with this manual and
referenced documents
○
Use of non-specified equipment
○
Failure to observe the prescribed repair
and maintenance intervals
○
Operation with a damaged, missing, or
improperly performed subsequent ATEX
finish
1.22 Operation in potentially explosive
atmospheres
Operation is only permitted in compliance
with:
○
All information within this manual and
the information within the referenced
documents
○
All laws and regulations that the operator
must observe
○
The information on explosion protection
according to Directive 1999/92/EC (ATEX
137)
○
The ATEX approval
1.23 Explosion protection marking
The explosion protection marking is located
on the Declaration of Conformity and on the
rating plate.
