19
Figure 8 Glue quantity regulating handle
8.4.4 Cylinder working pressure adjustment：
Due to changes in the edge thickness must be to pressure with a cylinder, edge
compression roller cylinder, cut take the work pressure of the cylinder to make
corresponding adjustment, value adjustment range is as follows:
Equipment
Working
pressure（Mpa）
Equipment
Working pressure
（Mpa）
Front pressure
0.2-0.3
End cutting down
0.2-0.3
Back pressure(2)
0.2-0.3
End cutting up
0.3-0.4
Cutter
0.2-0.6
Feed cylinder
0.1-0.2
Special remind: as a result of some edge belt material is more sensitive to temperature,
so when the ambient temperature is below 15 DEG C, may have an impact on the edge,
blunting effect. The method can be used to improve the environment temperature of the
tray of the tray.
8.5 End timming system
This system is used to trim the edge blunt edge plate front and rear excess sealing
material.
Blunting
system
using
high
speed
frequency
conversion
motor
0.55KW*2.200Hz.18000RPM and profiling track structure, ensures that the motor cutting
cut section of smooth and tidy. Before and after the butting motor adopts imported
cylinder, imported linear guide, ensure the motor cutting in the long-term stable and
accurate. The motor base is made of precision, which ensures the strength of the machine
tool's long-term work. Block system block and the tail two parts together. Each system
has been the standard to debug in the factory, under normal working condition has no
need to debug.
8.6 Fine trimming system
This system is for the side edge of the upper part of the lower sealing material to
repair the extra sheet edge after processing. Repair system using high speed variable
motor (0.75KW*2.200Hz.18000RPM) and profile modeling tracking structure, ensure the
motor trimming plate on the lower part of the smooth neat. Repair edge profiling at
the factory has made a precise adjustment, but in the actual production process due
to changes in the band edge and the edge plate specifications, material, may adjust
the following parts:
8.6.1 Under the regulation of finishing automatic trimming device:
