16
Continuous Run with Manual Stop
Run time accumulates only while the pump is running.
Continuous Run mode performs one sample from 1 to
999 minutes, then automatically resets to zero and counts
up to 999 again until the user manually stops the pump.
1. Press
or
to scroll to Cont. Press [
] to select it.
The pump will start and the LED will display cumulative run time up to
59 seconds in seconds, then switch to minutes. The timer will count up to
999 minutes, automatically reset to zero, and count up to 999 minutes again
until the user manually stops the pump.
2. Press [
] to place the pump in Hold when the desired sampling time has
elapsed. The LED will display cumulative run time and Hold alternately.
To continue the sample run:
Press [
].
To terminate the sample and reset the pump:
Press
while in Hold.
Sample Reset (rSEt) will
fl
ash on the LED. Press [
].
User Options During Continuous Run Sampling
Viewing ba
tt
ery status
Press
. Display will automatically return to
cumulative run time after
fi
ve seconds or press
again.
Hold mode
Press [
] while the sample is running to
place the pump and timer in Hold. Hold and
cumulative run time will display alternately.
Press [
] while in Hold to continue the
sample run.
Terminating a sample and rese
tt
ing the pump
Press
while in Hold. Sample Reset (rSEt) will
fl
ash on the LED.
To terminate the sample and reset the pump:
Press [
].
To continue the sample run:
Press
to return the display to Hold.
Press [
].
Digital display:
Continuous Run
For Intermi
tt
ent Sampling, see Advanced Setup.
