Form 38054 Rev 1902
Page 32 of 32
Appendix
Appendix: Performance Pro
fi
le
Flow range
Constant
fl
ow from 1000 to 5000 ml/min
(low
fl
ow from 5 to 500 ml/min requires low
fl
ow holder)
Compensation range
(back pressure capability)
5000 ml/min at 20 inches water back pressure
4000 ml/min at 30 inches water back pressure
3000 ml/min at 40 inches water back pressure
2000 ml/min at 50 inches water back pressure
1000 ml/min at 50 inches water back pressure
Flow control system
Isothermal, corrects for changes in back pressure, temperature, and atmospheric pressure
Flow fault/Auto-restart
If pump is unable to compensate, it will go into
fl
ow fault mode and try to restart 5 times.
Power
Removable rechargeable Lithium-ion (Li-Ion), 7.4 V, 2.6 Ah, 19.24 Wh or AC using cradle
Run time
20 hours at 2000 ml/min
†
10 hours at 5000 ml/min
†
Inde
fi
nite run from charging cradle
Charging method
Cradle, available as a single unit using Single Cradle Power Supply (Cat. No. 220-600);
chainable up to 5 units using a Multi Cradle Power Supply (Cat. No. 220-700)
Charging Time
(varies with battery capacity
and level of discharge)
Approximately 3 hours
Accuracy
Flow control: ± 5% of set-point after calibration to desired
fl
ow
Atmospheric pressure: ± 0.3 in Hg
Temperature: ± 1.0 C
Temperature ranges
Operating: 32 to 104 F (0 to 40 C)
Charging: 32 to 113 F (0 to 45 C)
Storage: -4 to 113 F (-20 to 45 C)
Humidity ranges
Operating:
≤
95% RH, non-condensing
Storage:
≤
95% RH, non-condensing
Altitude
Corrects
fl
ow for changes in temperature (32 to 104 F/0 to 40 C) and ambient pressure up to
15,000 feet (4572 meters) above and down to 4500 feet (1372 meters) below sea level.
Display/Parameters
Color LCD/real-time
fl
ow rate, ambient temperature, ambient pressure, accumulated volume,
elapsed time
User interface
Resistive touch screen with auto-dim and locking options
Status LEDs
Dual LED, blinking green = running pump, blinking red =
fl
ow fault
Sound Level
Average 51.7 dB at 3-ft (1-m) distance using a 37-mm 0.8-
μ
m MCE
fi
lter cassette
Tubing
Requires 1/4-inch ID tubing
Dimensions
4.1 x 3.7 x 2.8 in (10.4 x 9.4 x 7.1 cm)
Weight
19.4 oz (550 gm)
Certi
fi
cations
• Intrinsic safety: UL Class I, Div. 1, Groups A,B,C, and D; Class II, Div. 1, Groups E,F, and G;
Class III, Div. 1 hazardous locations when used with SKC battery pack model P75718; T-Code T3C.
Exia; Class I, Zone 0, Gp IIC (SKC Cat. No. 220-5000TC)
• CE marked
Case material
Polycarbonate with rubberized anti-static overmolding
Features
Real-time clock, manual and PC programmability, on-screen battery status display, real-time
fl
ow
indication, CalChek automatic calibration, ergonomic case design, secure clip, cradle for charging,
calibration, PC connectivity (charging e-Cradle model only), and ultra-quiet operation
Media
Use to sample with sorbent tubes,
fi
lters, size-selective particulate samplers, and impingers
Warranty
1-year limited warranty
† Tested using 37-mm 0.8
μ
m MCE
fi
lter with new pump and ba
tt
ery. Pump performance may vary.
