skcinc.com
Form 37165 Rev 200217
Page 4
Determining Battery Charge Status
The battery status icon at the top right of the pump display screen has four bars that decrease in number as battery
charge is depleted. Use the table below to interpret the battery status.
Icon Displayed
Battery Charge Remaining
Four bars
Full battery charge, approximately 75 to 100%
Three bars
Approximately 50 to 75%
Two bars
Approximately 25 to 50%
One bar
Approximately 5 to 25%
No bars
Low battery fault is imminent. Pump will stop and power off eventually. When pump is
powered on again, elapsed run time and fault icon will be displayed on the screen until
pump is reset.
See Using the Operation Screens.
Using the Touch Keypad
Lift the protective screen cover. Use your fingertip to touch the three keys on the screen keypad:
U
p and down arrows
increase or decrease flow rate; during sampling, touching
either arrow key briefly displays the relative flow indicator.
See Set/Calibrate Flow
Screen for more details.
PUMP
starts and pauses/stops pump; touch and hold to reset elapsed time.
Using the Operation Screens: Set/Calibrate Flow and Sampling
Set/Calibrate Flow Screen
Touch and hold the up and down arrow keys on the touch keypad to increase or decrease flow rate (
see below
) with
pump connected to a calibrator.
Actual flow rate is displayed on calibrator only.
Battery status
indicator
See Determining Battery Charge Status.
Relative flow indicator
See Relative Flow below.
Flow rate being increased
Flow rate being decreased
