Skandia Elevator KTG, Assembly Instructions Manual

Page: 16 / 28

The trench intake section is designed so that it can be connected to the
intake pit.
!
WARNING!
• The connection between the trench intake section and the intake pit
must be permanently mounted and enclosed.
• The intake pit must be installed with a permanent protective grating
! IMPORTANT!
The full weight of the intake pit must never rest on the conveyor.
Connection between trench intake section and intake pit
Trench intake section
A trench intake section is a self-regulating inlet used for feeding from an
intake pit.
Assemble the outlet as instructed in the section "Assemble the machine."
!
IMPORTANT!
Use only recommended outlet and connecting components.
! WARNING!
Connections to, from, and between machinery must be permanently
mounted and fully enclosed. If the installation design does not allow this
at an outlet, finish off with a 1 m (3.3 ft) pipe.
16
SKANDIA ELEVATOR – KTG
Connection of the machine