Skandia Elevator KTG, Assembly Instructions Manual

Page: 26 / 28

1.
Assemble components (A-C) with the same bolt.
2.
Install the motor and transmission chain.
3.
Tighten the motor bridge (C) by hand and secure it.
!
IMPORTANT!
Adjust the tightness of the transmission chains continuously. For more
information concerning the transmission chain, see the separate
maintenance instructions.
4.
The transmission guard (D) is hooked on at the bottom and fastened with two
bolts at the top.
! WARNING!
• The motor must be installed by a qualified electrician.
• The power switch must be permanently mounted and located to allow
easy access when performing maintenance work.
• Make sure that the transmission guard is installed during operation.
!
IMPORTANT!
• Make sure the motor protection is set to the correct ampere setting for
the motor.
• If the machine is being assembled outdoors, the motors and
transmissions must be fitted with a weather cover.
26
SKANDIA ELEVATOR – KTG
Assembling the motor