Skandia Elevator KTG, Assembly Instructions Manual

Page: 25 / 28

Note! The overload flap is equipped with an adjustable snap lock. The
resistance of the snap lock can be regulated with screws (B) and (C). Screw
inward to increase the resistance and outward to decrease. This ensures
that the flap only opens (and power shuts off) at actual overfill or deliberate
opening.
B
C
A
! WARNING!
• Ensure the safety switch for the pop up overloading flap is engaged
during operation.
• All electrical equipment must be connected by a qualified electrician.
See separate connecting directions for electronics.
! WARNING!
The rotating drive shaft is partially exposed between the gearbox motor
and the machine if the weather cover is not used on machines with
gearbox motors.
12.
Pop up overloading flap (A) with safety switch is an optional accessory that
stops the conveyor if it is overloaded or when the pop up overloading flap is
opened.
13.
25
SKANDIA ELEVATOR –KTG