STATION PARAMETER CONFIGURATION
Click on to navigate to the parameter Setup screen. This screen is not available when
using the Gateway, as these set points are enered in the controller it is connected to.
SJE
®
29 SJE Panel Link
™
RTU User Manual
PARAMETER
PURPOSE
DEFAULT
VALUE
Alarm 1-4 delay
Delay timer used to confirm the presence of a closed contact.
2 Sec
Power loss Alarm delay
Delay timer used to confirm the loss of the 24Vdc power supply.
30 Sec
High Tank Level Alarm
delay
Delay timer used to confirm the presence of a high level measurement from
the transducer. This alarm is triggered by the
High Tank Level
value.
5 Sec
Low Tank Level Alarm
delay
Delay timer used to confirm the presence of a low level measurement from the
transducer. This alarm is triggered by the
Low Tank Level
value.
5 Sec
Acknowledge Alarm delay
If an alarm becomes active, the timer starts, and the operator must click the
button on the screen before the timer times out.
If not acknowledged, the indicator turns
red
and can be used to notify other
users of the failure to acknowledge. This function is useful if only one user is
on standby, and may not be able to respond in a timely manner.
20 Min
Press after edits to store values to the RTU.
