CV Tab
The CV Tab allows the Arpie to control analogue synth gear using standard CV/Gate
connections. CV Tab also supports a pulse clock output which can optionally be set
to output accent pulses instead.
The CV output supports 1V/oct and Hz/V. The Gate output is a +10V V-Trigger. Clock
output is +10V.
CV Tab includes the Memo Tab functionality, allowing 16 patches (i.e. saved Arpie
states) to be stored. This is described in the Memo Tab section.
The CV Tab functions are selected via the long-press PLEN menu, on LEDs 2-8 as
follows
LED 1 controls clock division as follows:
Clock div Clock Rate
OFF
16
th
Note Clock Rate
ON
8
th
Note Clock Rate
Summary of Contents for Arpie
Page 1: ...Arpie MIDI ARPEGGIATOR User Guide Firmware V6 September 2019...
Page 29: ......
