Sixty Four Pixels Arpie, User Manual

Page: 23 / 40

*SYNC
MIDI Options
These options give you control over how Arpie internally routes MIDI information.
•
thru channel msg can be switched on so that non-note channel messages (CC
change, pitch bend etc) which are received on Arpie
’s configured input
channel, can be sent through to Arpie ’s output channel. This allows the
performance parameters to be sent from your controller keyboard to your
synth.
•
thru notes - If you have Arpie listening on a specific input channel (not Omni
mode) then this option controls whether note messages for other channels
will be passed directly through to Arpie
’ s MIDI output.
•
thru other chan controls whether non-note channel messages (CC, bend etc)
for other channels will be passed through to Arpie
’ s MIDI output.
• ext clock midi in determines whether Arpie will listen for external MIDI clock
ticks on the MIDI IN port. Source must also be set to external for these to be
used.
•
ext clock midi aux determines whether Arpie will listen for external MIDI clock
ticks on the AUX MIDI SYNC port. Source must also be set to external for
these to be used.
•
block mode msg - When ON, Arpie will remove MIDI ‘ Channel Mode Messages’
(CC numbers 120 thru 127) from the data sent through from input to output.
E.g. Some controllers might send unwanted channel mode messages such as
‘all notes off’ when releasing keys - Arpie can filter these out.