Sync Tab
The Sync Tab allows the Arpie to work with 5V pulse clocks (e.g. as used on
Eurorack modular gear or small sequencers like Volca, Pocket Operator etc)
When a cable is connected to Ext Clock Input, the Arpie will function as a clock
slave. You must reset Arpie after inserting or removing the cable from the Ext Clock
socket.
When running from a regular external pulse clock, set Arpie to internal clock mode.
Tip: If Arpie is set to external clock mode and there is no incoming MIDI clock, the
external pulse clock input will function as a single step advance, with one pulse
advancing one step, regardless of RATE setting etc. The pulses do not have to be
regular.
A signal received from Ext Clock input is duplicated at the Clock Output.
If there is no cable connected to Ext Clock Input, the Arpie will run using its internal
clock, and will output 5V clock pulses from the Clock Output socket.
Pulses can be 1/8
th
or 1/16
th
of a note, depending on the setting of the clock div (LED
1 on the long-press PLEN menu)
Clock div Clock Rate
OFF
16
th
Note Clock Rate
ON
8
th
Note Clock Rate
Summary of Contents for Arpie
Page 1: ...Arpie MIDI ARPEGGIATOR User Guide Firmware V6 September 2019...
Page 29: ......
