MODE
Arp Mode / Set All Trigs
This option allows you to select between Arpie arpeggiation modes:
•
up mode plays notes of the chord in ascending order
•
down mode plays notes of the chord in descending order
•
up-down plays notes of the chord in ascending then descending order. If the
sequence spans multiple octaves, all octaves are spanned on the way up
before returning down.
•
random plays the notes of a chord in a random order. This order is
determined when the arpeggio is first built and is repeated until the arpeggio
is rebuilt (e.g. by pressing the random button again)
•
random2 plays the notes of a chord in a random order which is re-shuffled
each time the arpeggio sequence completes.
•
as played plays the notes of the chord in the order they are received on the
MIDI input.
•
poly gate plays all the notes of the chord at the same time. Thicken up with
SPAN and add some groove with PATN to get some classic chord stabs!
The right side data entry buttons can be used to reset the PATN and PLEN
information.
•
random all applies random accent, tie, full gate, octave up to all steps that are
active in the rhythmic pattern
•
random trig randomises the play/mute and accent trigs
•
clear all sets all steps to mute (LED off), sets PLEN to 16 steps and clears all
other trig layers.
•
reset all sets all steps to play (LED on), sets PLEN to 16 steps and clears all
other trig layers
Summary of Contents for Arpie
Page 1: ...Arpie MIDI ARPEGGIATOR User Guide Firmware V6 September 2019...
Page 29: ......