Document NO.:RD-519-39-001
Version: A 2018.04.20
- 7 -
Live = Brown
Neutral = Blue
I/O= White
Wire on alarm harness connected to:
Brown wire --- Live wire of AC line
Blue wire --- Neutral wire of AC line
White wire --- I/O signal as interconnect line of other
Units in the multiple station set up (refer to Diagram 8).
Mounting Instructions:
•
After selecting the proper location for your smoke alarm,
wiring the AC base harness as described in the Wiring
instructions (AC power should be turned off at this stage).
•
Remove alarm from the base with screwdriver (refer to
Diagram 9).
•
Hold the base on the installation position, mark
installation hole of the base with pencil.
•
Bore two installation holes on the sign with electric drill.
Make diameter of holes is 5mm. Strike the two plastic
plugs into holes with hammer.
•
Attach the base to the plastic plugs and fix tightly with the
screws into the plastic plugs. (Refer to Diagram 10 -
installation sketch map).
•
Connect the AC power cord to the base.
•
Fix the battery into battery box.
•
Fit the alarm on the base until matching well on the base.
•
Turn on the AC power. The green LED should be lit when
the alarm is operating from AC power.
•
Test smoke alarm using test button. The alarm will sound
3 short beeps – 1.5 seconds pause. Then repeat it until
release the button.
•
WARNING
: To prevent injury, this unit must be securely
attached to ceiling in accordance with the installation
instructions.
Service and Warranty:
Company warrants to the original consumer. Purchase each
new smoke alarm to be free from defects in material and
workmanship under normal use and service for a period of 3
years from the date of purchase. This warranty does not cover
damage resulting from accident, misuse or abuse or lack of
reasonable care of the product. In no case shall company be
liable for any incidental or consequential damages for breach
of this or any other warranty express or implied
,
whatever.
The bad product can be mailed to the following address with
a detail explanation of problem.
You feel that your smoke alarm is defective in any way after
reviewed this manual, do not tamper with the unit. Return it
for servicing to:
Manufacturer:
SITERWELL ELECTRONICS CO., LIMITED
ADDRESS: NO.666 QINGFENG ROAD, JIANGBEI
DISTRICT, NINGBO,ZHEJIANG PROVINCE
,
CHINA
TEL: 0086-574-87729581
FAX: 0086-574-87729581
E-MAIL:[email protected]
I
nstallation sketch map:
Diagram 10
Diagram 9
Diagram 8