E |3
Type
This is the protocol type to be forwarded. You can choose to forward
“TCP” or “UDP” packets only, or select “both” to forward both “TCP” and “UDP”
packets.
Port Range
The range of ports to be forward to the private IP.
Comment
description of this setting.
Add
Fill in the "Private IP", “Type”, “Port Range” and "Comment" of the
setting to be added and then click "Add". Then this Port Forwarding setting
will be added into the "Current Port Forwarding Table" below.
Remove
If you want to remove a Port Forwarding setting from the "Current
Port Forwarding Table", select the Port Forwarding setting that you want to
remove in the table and then click "Delete Selected". If you want to remove
all Port Forwarding settings from the table, just click "Delete All" button. Click
"Reset" will clear your current selections.
Summary of Contents for WLR-6000
Page 2: ...WLR 6000 Wireless Concurrent Dual Band Gigabit Router 450N 802 11a b g n ...
Page 12: ...E 3 7 Setup LAN WAN WAN connection LAN connection ...
Page 25: ...E 3 WLR 6000 Statistics Shows the counters of packets sent and received on WAN LAN WLAN ...
Page 27: ...E 3 Click APPLY to complete the configuration ...