9 - DISMANTLING
9.1
General instructions
When dismantling the central suction system, dispose appropriately of used parts or material, which could
endanger human health or well-being as well as the environment if handled improperly.
You must be acquainted with sites/companies authorized to collect and dispose of used parts and materials.
The disposal and/or recycling of any part of the suction system must be carried out in compliance with the legal
regulations in force
.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and
other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment.
To reduce the environmental impact of WEEE (Waste electrical and Electronic Equipment) and
minimize the volume of WEEE entering landfills, please reuse and recycle.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling
of this product, please contact your local city office, your household waste disposal service, the shop where
you purchased the product, your local dealer or distributors.
No air suction in all air inlets
No power in the main supply line
The thermal relay of the motor
does not work
Check for the cause upstream
the central unit
Leave the motor cooling down
for a few minutes
The power supply contacts are
cut off or the microswitc of the
inlet does not work
Contact the Assistance Service
No air suction in only one inlet
Several suction inlets are used
simultaneously
The hose or the cleaning
accessories are broken/damaged
The filter cartridge is dirty
Top cover damaged or out of place
The pipes of the suction system
are obstructed
Air exhaust piepes are obstructed
Use only one suction inlet at a time
Check the integrity of the flexible
hose and accessories and
replace them if necessary
Clean or replace the filter cartridge
Check the cover integrity
and correct placing
Contact the Assistance Service
Contact the Assistance Service
Weak air suction
Dust bag out of place or full
Check the correct positioning
of the dust bag. If full, replace it..
The central vacuum unit keeps
running even when the suction
inlets are closed
The micro switch of a single
inlet does not work
Turn off the central unit and
contact the Assistance Service
10 - TECHNICAL PROBLEMES
10.1Troubleshooting
Cause
Solution
Problem
16
Wolly2 12/12-V01
E
n
g
li
s
h
