TECNO R-evolution Instruction manual
24
21/01/16 Rev:3.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
Tighten the screws in the wall plugs
and check that the bracket is well
anchored to the wall.
3
Hook the vacuum cleaner to the anchor-
ing bracket by lifting it, leaning it against
the wall and allowing it to slide down until
it
fi
ts into the
fi
xing plate.
4
9.7 Types of connection of dust collection couplings
The TECNO R-EVOLUTION vacuum cleaner offers the Customer the possibility to choose the desired
con
fi
guration, depending on the suction cleaning desired:
•
confi guration 1 cyclonic bagless vacuum cleaning
•
confi guration 2 bag suction
Choosing the cyclonic suction, the Customer has the possibility to have a service suction inlet to be
found directly on one side of the appliance; this service inlet can be used with a
fl
exible hose to vacuum
clean the area immediately around the appliance.
During installation:
• if the con
fi
guration 2 option is selected, the elbow coupling will be assembled and the Customer will
remove the conveyor cone and insert the ring seal; the closing cover will then be placed in the cyclonic
suction dust inlet.
• if the con
fi
guration 1 option is selected, the suction inlet will be assembled.
.
