TECNO R-evolution Instruction manual
44
21/01/16 Rev:3.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
Reassemble the dust bin inside its housing under the suction system and lock the closing handles.
Switch the suction system on by pressing the ON/OFF switch.
After re-starting the system push the “RESET” button to reset the dust bin alarm.
Remember to take care when emptying the bin: if there is a huge quantity of dust, make sure you
do not throw away the conveyor cone. Always check that the conveyor cone is still in place and
correctly assembled in its housing inside the bin.
12.5 Replacing the dust bag (bag suction)
Switch the vacuum cleaner off by pressing the ON/OFF switch.
Slide the dust-collecting bag from the ver-
tical end of the inlet opening
2
Put the conveyor cone back in position
4
Disassemble the dust container
1