This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
Mod. PRD 20/3 - Last updating 10/2019
TS-One Manual for use and maintenance
32
The fixed base platen, on the side where the fabric is positioned, is covered in silicone rubber
for high temperatures, while the heated platen has a protective film, so the fabric never comes
in contact with the metal elements. The heat transfer material is applied to the fabric by
positioning them between the base platen and the heated platen by effect of the temperature
and closure pressure exerted using the handle.
2.3 Interchangeable Platens
The TS-One heat press can be equipped with different platens and accessories:
flat surfaced platens of different dimensions intended for transfer on flat surfaces
(e.g. t-shirts) and curved platens for example on caps and heels of shoes.
The large platen (38x50 cm) is equipped with a 2kW heating coil, while the small, flat platens (15x15
cm) and curved platens (caps and “Achille” shoes heels) are equipped with two, 250 Watt spark plugs.
2.4 Technical data
Voltage
Rated power at full load
Weight
Platen dimensions
Maximum temperature
Cooling time
Height
Width (min/max)
Depth (closed/open)
2.5 Use Conditions
Temperature: +5°C/+40°C
Humidity: up to 50% at the maximum temperature of +40°C
Atmospheric pressure: operation of the press is guaranteed up to 1000 m asl
flat platen 38x50
curved platen for caps
flat platen 15x15
“Achille” curved platen
for heels of shoes
“H” lower flat
platen
lower flat platen
15x30 – 10x38
TS
ONE
2
230 Volt 50Hz
2 kW
45 Kg
38 x 50 cm
230°C
120 minutes
66cm
55cm
65cm
230 Volt 50Hz
2 kW
57 Kg
38 x 50 cm
230°C
120 minutes
63cm
121/125cm
64cm
230 Volt 50Hz
2 kW
58 Kg
38 x 50 cm
230°C
120 minutes
70cm
56cm
88/142cm
EN
TS-ONE
TS-Double
Swing and Pull
Summary of Contents for TS-DOUBLE
Page 74: ... SISER S r l 2019 Notes ...