Siruba ASP-EBJ100S, Instruction Book And Parts List

Page: 34 / 60

P25
【注意】
鬆緊帶被定位器①壓住的狀態下，製品上浮將
是斷線或縫製不良的原因。這時可調整送帶設
備的前後位置。
•
送帶設備的前後位置調整方法
放鬆螺絲③（五個地方），把底座④順著引導
板⑤前後移動。調整後，先鎖緊底座④的三顆
螺絲再將送帶設備後位置固定板⑥的兩顆螺絲
鎖緊於底座④上。
【
Caution
】
In the situation which elastic tape
be pressed by locator
①
, product puff up will
be the reason of thread breaking or reject.
• Adjusting method of fore and rear position
of feeding device.
Loosen screw
③（
Five spots
）
, move base
plate
④
back and forward with guide plate
⑤
.
After adjustment, tighten the three screws of
base plate
④
, then tighten two screws of fixed
plate
⑥
which behind the feeding device on
base plate
④
.

①
②
4.5~5mm
③ ⑥
⑤ ④