Siruba ASP-EBJ100S, Instruction Book And Parts List

Page: 11 / 60


安裝
INSTALLATION
P2
Introduction
※ 注意：安裝作業需兩人以上執行。
(1)
卸下①的兩個螺絲，將擴充檢測部分②暫時
分離；這時，另一個人用手托住將擴充檢
測部分②，往圖示的方向移動③。（注意
請勿損傷擴充檢測部分②的電線）
(2)
將擴充部分④裝在桌面上之⑤的位置。
(3)
用剛開始卸下的兩個螺絲①和配件盒內的兩
個螺絲將擴充部分③跟擴充檢測部分②固
定。
(4)
將所有插頭和插座連接。
(
確實卡住
)
※
Caution
：
The installation work need two or
more people to work on.
(1)Take down two screws of
①
, temporarily
dispart the feed detecting part
②
. At the
moment, the other person use hands to
hold the feed detecting part
②
and move to
the direction
③
on the picture.
（
Be aware
do not damage wires of the feed detecting
part
②）
(2) Install the feeding part
④
onto table
⑤
.
(3)Use two screws of
①
at the beginning you
took down and the other two screws in the
accessory box to fix the feeding part
③
and the feed detecting part
②
.
(4)Plug all the plugs in the sockets. (Make
sure them all be fixed.)
④
④
① ⑤
③
②
①
②