7
模式切換鍵
mode change
key
按
鍵進入：全自動、半自動、自由縫、全手工等之間切換
;
全自動：當布料蓋住第一光眼時，機器會自動啟動工作不需用腳去踩踏調速器踏板；
半自動：布料遮住第一光眼，腳踏調速器才能驅動機器工作；
自由縫：無布料遮住第一光眼，腳踏調速器一樣也能驅動機器工作；
全手工：剪線、抬壓腳等所以動作需要人工去完成；
※
:
全自動、半自動、自由縫等安全開關斷開情況下腳踏調速器無法驅動機器工作；
全手工：安全開關斷開情況下一樣能使用腳踏調速器啟動機器工作）。
Touch
key to enter to change to: fully automatic, semi-automatic, free sewing, full
manual;
Fully automatic: When the cloth covers the first sensor, the machine will automatically start
working without pressing the pedal;
Semi-automatic: when the cloth covers the first sensor, need to press the pedal to drive
the sewing machine to start working;
Free sewing: no cloth to cover the first sensor, just press the pedal can drive the sewing
machine to work;
Full manual: the thread cutting
、
presser foot lifter and all other action should be made by
hand;
*: when the mode is under fully automatic
、
semi-automatic
、
and free sewing , press the
pedal can not drive the sewing machine to work when the safety switch if off;
Full manual: Press the pedal can be used to start the sewing machine when the safety
switch is off.
多功能快速鍵介紹
multifunction shortcut key introduction
8
剪線、吸氣模式
切換鍵
auto trimmer
、
suction mode
change key
單按
鍵一下進入“吸氣模式、剪線模式＂選擇，按
鍵可移動游標選擇模式，
或者按
、
鍵移動游標選擇模式，選擇好模式後按
鍵進入參數調整：
吸氣模式：前吸氣、後吸氣、前後吸氣、吸氣關閉。
剪線模式：前剪線、後剪線、前後剪線、剪線關閉。
※：移動游標選擇參數同上面方法。
Single touch
key to enter "suction mode, thread cutting mode" option, touch
key can move cursor select mode, or touch
、
key to move cursor
select mode,when mode is finish choosing, touch
key to enter the parameter
adjustment:
Suction mode:front suction, back suction, front and back suction
、
suction close.
Thread cutting mode: Front thread cutting, back thread cutting, front and back thread
cutting, thread cutting close.
* : Move Cursor to select parameters as above.
P4