S18
後感測器靈敏度
Back sensor sensitivity
degree
55%
5~100
為適應不同布料設定後光眼的發射強度
Setting photo-eye through the fabric strength,to adapt to
different fabrics
S19
前抬壓腳保留時間
Front foot presser lift
retaining time
400
100~
2000 ms
前光眼感應到布時壓腳自動抬起維持時間
When front sensor feel the cloth, the foot presser lifter
maintain time
S20
後抬壓腳延遲啟動
Back foot presser lift start
time
0
0~
2000 ms
腳踏板後踏壓腳回應的時間（毫秒）
The lift foot response time after latter foot
pedal(millisecond)
S21
抬壓腳保護時間
Foot presser protection time
6
1~120s
手動抬壓腳持續多少時間後自動關閉壓腳輸出（秒）
Lifter the foot presser by hand some time then auto close
foot presser output(second)
S22
放壓腳保護時間
Release foot presser
protection time
20
20~
800 ms
壓腳釋放保護時間（毫秒）
The foot presser release protection time (millisecond)
S23
連續送布吸氣剪線
Continue feed cloth suction
cutting line
0
0~1
0
：關閉
1
：開啟
0:Close 1:open
S24
運轉中手動開關動作
Operate manual switch
action
1
0~3
0
：電機運轉時按手動剪線不剪，
1
：可以剪
(
全手工模式時有效
)
2
：運行中禁止中光眼保護
3
：運行中禁止中後光眼保護
0: when motor is running, press knife switch the thread
line is not cutting,
1: Can Cut (under the manual mode)
2: when the machine is running, the middle sensor
protect is prohibition
3:when the machine is running, the middle and back
sensor protect is prohibition
S25
安全開關選擇
Safe switch choice
3
0~3
0
：關閉安全開關
1
：縫台安全開關
2
：壓腳安全開
關
3
：縫台
+
壓腳安全開關開啟
0:Off safety switch 1:seam safety switch 2:foot safety
switch 3:
S26
切刀保留時間
The knife retaining time
25
1~
1000 ms
切刀動作時間（基本不用調整）
Cutting action time (basically no adjustment)
S27
介面恢復時間
Recover time
5
5~
100s
控制台在進入功能表後多少時間跳回主介面
After entering the control panel ,how much time to jump
back to the main menu interface
S28
光眼模式（數量選擇）
Sensor mode (number
choice)
2
1~2
1:
單光眼
2:
雙光眼（※
:
第三光眼需要單獨開啟
s35
）
1:Single photo-eye 2:double photo-eye
S29
前光眼極性選擇
Front sensor polarity
0
0~1
0 :
對射
1 :
反射
Opposite polarity opposite
S30
後光眼極性選擇
Back sensor polarity
0
0~1
0 :
對射
1 :
反射
Opposite polarity opposite
S31
壓腳全力間
Foot presser full power time
180
10~
990 ms
壓腳全功率工作時的時間
Time of full power operation
S32
壓腳全力功率
Foot presser full power
100
20~
100%
壓腳開始動作時，瞬間的輸出功率
When the foot starts to move, the instantaneous output
power
S33
壓腳保持功率
Foot presser retaining power
20
10~
90%
壓腳抬起後維持住後的功率（不能超過
50
）
Pressure foot lift after the maintenance of the power to
live (not more than 50)
P11