background image

 TROUBLESHOOTING GUIDE (CONT.)

14

1. Check that all the connections are tight.
2. If the numbers are scrambled or the buttons are unresponsive, 

replace the Control Panel.
3. If the temperature indicator does not work or reads “--” or “EP”, 

replace the Control Panel.

1. Check that all the connections are tight.
2. If one light does not work, replace the light fixture. 

Note: Do not touch the glass part of bulb with your

fingers during installation.   

3. If neither the lights nor the radio are working, replace the Power Supply Box.

1. Check that the volume is not turned all the way down and that the fader control is set correctly. 
2. If only one speaker is working, check to see that the sound balance on the stereo is not set all the way 

to one side. 
3. Check that all the connections are tight.
4. Replace the speaker, if necessary.

1. Check that all the connections are tight.
2. Replace the Color Therapy Light or Control Panel, if necessary.

Problem

Problem

Problem

Problem

THE CONTROL PANEL DOES NOT WORK

THE LIGHTS ARE NOT WORKING

THE SPEAKERS ARE NOT WORKING

THE COLOR THERAPY LIGHTS ARE NOT WORKING

Solution

Solution

Solution

Solution

REPLACEMENT PARTS

In the event that you need replacement

 

manufacturer. The use of unauthorized substitutes may damage your sauna or cause electrical hazards resulting in 

, and will void the warranty.

SAUNA USE DISCLAIMER

Always consult a health care provider who is knowledgeable in sauna use before using a sauna.
Saunas are powerful devices and monitoring your progress by a professional trained in sauna use is always advisable.
Variables of sauna therapy such as health condition of user, duration of sauna therapy, proper hydration, electrolyte and 

mineral balance and restoration must be properly considered and heeded before proceeding with sauna therapy. 
Blue Wave products are not registered with the United States Food and Drug Administration (FDA) as a Medical Devices. 

Consult your licensed health care provider to see if our saunas are right for you. Blue Wave products and/or its partners, 

associates, etc. are not liable for the use of Blue Wave products nor any incidental or consequential damages. Under no 

circumstances shall Blue Wave products or any of its representatives be held liable for injury to any persons or damage to 

any property. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above 

limitations or exclusions may not apply to you.
The FDA requires us to inform you that this product is not intended to diagnose or treat any disease or medical problem 

and is not a substitute for regular medical care from a licensed health care provider.

parts, use this guide to reference the part number. It is important to use only replacement parts specified by the 

 

NOTE: This manual covers assembly of two different sauna models. Please make sure you are looking 

at the Parts List (pages 15 & 16) for your particular model, if you need replacement parts. 

Summary of Contents for SA7008


















Reviews: