63 98 536 D 3439
30
D 3439
.
201.06.10
.
02 10.2017
5 Installation and startup
Dentsply Sirona
5.4 Commissioning
Operating Instructions CEREC MC XL Premium Package
5.4.7.7.1
Höft & Wessel HW 8614/F2
1. Connect the HW 8614/F2 wireless module to the LAN port of the
milling and grinding unit using the LAN crossover cable (1 m).
2. Connect the plug-in power supply included in the scope of delivery
with the wireless module HW 8614/F2 and plug it into the power
supply.
3. If necessary, secure the wireless module in the selected operating
position using the preassembled Velcro ® tape.
In doing so, ensure that the rod antenna is vertically positioned.
4. Pair the wireless module of the milling and grinding unit as described
in the installation instructions included with the wireless module (REF
62 80 064).
You can pair multiple milling and grinding units with a CEREC acquisition
unit. If more than 2 milling and grinding units are operated at once, the
limited data bandwidth may cause processing time delays.
5.4.7.7.2
CEREC Radio Device
Creating a network
The supplied network devices have not as yet been part of a network. To
enable several networks from various operators to be created next to one
another or in the same area, new network devices must first form a
network. This is described in the following section.
To create a new network with several new network devices, perform the
following steps:
1. Place all network devices in the same area.
2. Switch all network devices on within one minute.
3. After switching on the last network device, wait approx. one minute.
4. Make sure that all network devices are connected, as indicated by the
green LED; see section “LED displays” in the “CEREC Radio Device”
operating instructions (REF 65 45 177).
All network devices now belong to a single network, which can be
operated as an independent network, and can communicate with one
another. In the event of problems, see section “'Network creation failures”
in the “CEREC Radio Device” operating instructions (REF 65 45 177).
Summary of Contents for CEREC MC XL Premium Package
Page 77: ......
