63 98 536 D 3439
D 3439
.
201.06.10
.
02 10.2017
11
Dentsply Sirona
4 Safety
Operating Instructions CEREC MC XL Premium Package
4.2 Opening the processing chamber door during the machining process
båÖäáëÜ
4.1.4
Accessories
In order to ensure product safety, this device may be operated only with
original Dentsply Sirona accessories or third-party accessories expressly
approved by Dentsply Sirona. In particular, only the power cable also
supplied or the corresponding original spare part may be used with the
unit. The user is responsible for any damage resulting from the use of
non-approved accessories.
4.2
Opening the processing chamber door during the
machining process
4.3
Wireless phone interference with equipment
The use of mobile wireless phones in practice or hospital environments
must be prohibited to ensure safe operation of the unit.
CAUTION
Instruments that continue to run
When the processing chamber door is opened during the machining
process, the instruments could continue to run for a short time.
➢ Be careful not to touch the instruments with your hand or any other
object during this time.
➢ Avoid opening the processing chamber door while the milling and
grinding unit is in operation.
➢ Before you open the processing chamber door, end any actions that
are running by pressing the
"Stop"
button on the milling and
grinding unit touch display or in the application software.
Summary of Contents for CEREC MC XL Premium Package
Page 77: ......
