Sirona Dental Schick CDR PlusWire, User Manual, Page: 13 / 35

CDR PlusWire User Guide B1051067 Rev. A 1
1. Overview
1.1. Purpose
Designed with the convenience of replaceable cables in mind, CDR
PlusWire enables customers to perform in-office Sensor cable
replacements.
1.2. Indications for Use
CDR PlusWire is to be used as part of an intraoral image acquisition
system and is indicated for individuals requiring intraoral dental
examinations.
1.3. System Description
CDR PlusWire is connected by its edge-card connector to the CDR
Remote Module (firmware revision 34 or higher), CDR Remote HS,
or the Sensor interface on the SDX Intraoral X-ray system. These
USB devices (or, in the case of SDX, its USB interface) are
connected by appropriate USB cable to a compatible PC
workstation,
1
running Windows Vista or Windows XP. When CDR
PlusWire cables are replaced, a utility is used to read / write Sensor
data from one cable to another.
1.4. PC Workstation Description
The PC workstation connects to CDR PlusWire via USB cable
(supplied seperately) and CDR Remote, or CDR Remote HS, or
SDX Intraoral X-ray Sensor Interface. The workstation serves as the
host for CDR DICOM or other compatible imaging software
products. Imaging software applications such as CDR DICOM
provide the capability to display, manipulate, store, and print images
acquired from CDR Sensors.
1
USB cables are available from Sirona Dental at the following lengths: 5 meter (B2250150), 2 meter
(B2250151), and 0.5 meter (B2250152).