18
SECTION 7.2 FITTING THE BURNER TRAY
Temporarily fit the burner tray and ensure that the suitable gas route has been achieved.
You can now place the burner tray into the firebox making sure that the fixing points are locate properly on
the firebox.
Fit the two securing screws through the front plate ensuring that the plate is in front of the front edge of
the fire box; secure the two screws at the back of the tray.
Connect the gas supply and tighten the gas connections.
With the slide control option please reverse the previous removal instructions taking care to a line the
linkage system as shown below.
Please note the position on the
securing bracket and ensure this is
not fixed upside down which will
cause the fire not to work.
