4
1 - Delivery and warranty
1.1 - Foreward
ATTENTION!
The symbols used in this manual are meant to draw the reader’s attention
to dangerous points and operations that can endanger the personal safety
of the operator or risk damaging the machine.
Do not use the machine unless you are certain that you have correctly
understood these warnings.
ATTENTION!
For greater clarity, some illustrations in this manual show the machine or
parts of it with the panels or carters removed.
Do not use the machine in these conditions; all protections must be
correctly fitted and in perfect working order.
This manual may not be reproduced, even partially, and its contents
cannot be used for purposes other than those permitted by the
manufacturer.
All breaches of the above are legally punishable.
1.2 - Keeping and using the manual
The purpose of this manual is to instruct the user, by means of texts and
figures, on transport, handling, use, and maintenance of the machine.
This manual must therefore be carefully read before using the machine.
Take care of the manual and keep it near the machine in an easily and
quickly accessible place for future reference.
If the manual should be lost or damaged, ask your dealer or manufacturer
for another copy.
If the machine is sold, inform the manufacturer of the name and address of
the new owner.
The manual reflects the state of technology at the time the machine is sold
and cannot be considered inadequate if it is subsequently updated on the
basis of new knowledge.
In this regard the manufacturer reserves the right to update its products
and related manuals without being obliged to update previous products
and manuals barring exceptional cases.
If in doubt, consult the nearest servicing center or the manufacturer.
The manufacturer’s aim is to continuously optimize its product and it
therefore welcomes any comments or suggestions on how to improve the
machine and/or manual.
25
6 - Using the machine
6.1 - Prescriptions
ATTENTION!
Only authorized personnel may use the machine.
Before beginning work, the operator must ensure that all the guards are in
place and that the safety devices are fitted and in efficient working order. If
that is not the case, switch the machine off and contact the head of
maintenance.
The product to be ground must be in pieces that can enter inside the
loading inlet and must be pushed with the proper pushing device (pestle)
NEVER USE YOUR HANDS.
6.2 - Setting up the outlet or the proper pushing device (pestle).
The machine can be set up in three different meat cutting groups:
A - Enterprise or normal
B - Half UNGER
C - Total UNGER
- System -C-, (Total UNGER), is made up of: a propeller "1" to transport
the meat, a hammer mill plate "2", a first blade "3" and the
corresponding plate with holes "4", a second blade "5" with the final
drilled plate "6".
- System -B-, (Half UNGER), substitutes blade “5” and the plate “6” with
the spacer "7".
- System -A-, (Normal), is the simplest method, consisting only of the
transport propeller, a blade and an exit plate.
It is not possible to assemble the plates from groups -C- or -B– on models
with a grinding group -A-, the complete group must be changed.
