background image

16 

                                                                                                                                                       

7.1 - GENERALITIES                                                                                                                

Before carrying out any maintenance activity it is necessary to: 
Disconnect the plug from the electrical outlet to completely isolate the machine 
from the rest of the system. 

 
7.2 - BELT 

The belt does not need any adjustments. Ususally, after 3/4 years it must be repla-
ced, in this case call the “ASSISTANCE CENTER”. 

 
7.3 - FEET 

The feet could deteriorate with time, thus reducing the stability of the machine. 
Therefore they must be replaced. 

 
7.4 - FEEDING CABLE

                                                                              

Periodically check the wear of the cable and call the “ASSISTANCE CENTER” 
to replace it. 
 

CHAP. 8 - DISMANTLING 

 
8.1 - PUTTING IT OUT OF WORK 

If for some reason it is decided to put the machine out of work make sure that it 
cannot be used by anyone: unplug the electrical connections. 
  

8.2 - DISPOSAL 

Once it has been put out of work the machine can be eliminated. To correctly di-
spose of the machine get information from any company responsible for such a 
service and take careful note of the materials used for the various components.  

ASSISTANCE CENTER 

AUTHORIZED RETAILER 

 INSTRUCTIONS FOR USE AND MAINTENANCE MANUAL 

               

 

Potato peeler:   

PPJ 10-20  

CE 

Mussel cleaner: 

LCJ 10  

CE

 

 
 

 

Summary of Contents for PPJ20









Reviews: