Sirius XM RAdio PowerConnect+, User Manual

Page: 33 / 60

33
• SUV:
1 . Feed the antenna cable underneath the rubber weather stripping of the
rear tailgate window/door and route the cable along the rear hatch . Lift
the weather stripping from the opening and tuck the cable inside it, then
replace the weather stripping . Pull the cable out from weather stripping
and route it into the cabin under the interior trim . Avoid hinges or gears
that could crimp or cut the cable .
2 . Route the cable through the SUV’s main cabin area under the interior
trim, towards the front of the vehicle . Use a blunt plastic putty knife or
similar blunt tool to lift the plastic trim just enough to tuck the cable
under underneath . Avoid side airbag locations on back pillars and above
the doors . Airbag locations are marked with “SRS” logos . Be careful not to
crimp or cut the cable .
3 . Bring the cable out from the trim near the front of the cabin and route
it under the carpet toward the dashboard or console . Coil any excess
cable in a hidden location, such as under the carpet, keeping it away from
any vehicle pedals or controls . Secure the excess cable with wire ties
(purchased separately) .
4 . Bring the end of the cable out at the Power Vehicle Dock
location . Leave yourself enough
cable so you can easily connect it
to the antenna connector of the
dock .
5 . Continue with “Step 5: Connect
the Magnetic Mount Antenna and
Power Power Adapter”
on page 36 .