32
connector of the dock .
6 . Continue with “Step 5: Connect the Magnetic Mount Antenna
and PowerConnect Power Adapter” on page 34 .
• Pickup Truck:
1 . Use a blunt plastic putty knife or similar blunt tool to lift the
rubber molding around the windshield and tuck the antenna
cable underneath it .
2 . Continue tucking the cable underneath the windshield molding
around the windshield to the lowest corner .
3 . At the lowest corner of the windshield, route the cable out of
the windshield molding and into the rubber weather stripping
around the door opening . Lift the weather stripping from the
opening and tuck the cable inside it, then replace the weather
stripping . Run the cable inside
of the weather stripping to the
bottom of the door opening .
4 . Pull the cable out of the
weather stripping at the bottom
of the door opening and route
it under the carpet toward the
dashboard . Coil any excess
cable in a hidden location, such
as under the carpet, keeping it
away from any vehicle pedals
or controls . Secure the excess
cable with wire ties .
Vehicle Installation
