12
Vehicle Installation
Step 2: Install the Dash or Vent Mount
Follow the instructions on the next several pages for the mounting method you
have selected .
NOTE!
The
Power
Connect Vehicle Dock included with Onyx EZ is compatible with
the T-slot style Dash and Vent Mounts . If you have an existing Dash Mount or Vent
Mount in your vehicle, you can continue to use it with this dock, and skip this step .
Installing the Dash Mount:
CAUTION!
The adhesive used on the Dash Mount may be difficult
to remove . Do not install this mount on leather surfaces (contact
your automobile dealership if you are unsure about your dash
surface), and make sure the air temperature is at least 60°F
(15°C) during installation . If it’s not at least 60°F, turn on the
heater in your vehicle to bring the temperature up to 60°F .
1 .
Locate a flat surface for the Dash Mount . Make sure there is ample
room for the
Power
Connect Vehicle Dock and Onyx EZ Radio when
installed .
2 .
Set the orientation of the Dash Mount before adhering it . Loosen the
knob and adjust the adhesive foot for the location you selected in “Step
1: Choose a Location for Your
Radio” on page 10 .
• Option 1 & Option 3
should be oriented as
I
.
• Option 2 should be oriented
as
II
.
3 .
The dock mounting plate can
be tilted in different directions . Adjust as necessary for your particular
1
2
