Sirius XM RAdio LYNX, User Manual

Page: 131 / 136

Troubleshooting
131
Problem Solution
Lynx does not show any of my
Bluetooth devices.
Lynx does not recognize my
Bluetooth device.
Is
Bluetooth
turned on? Tap Home , tap , tap Settings , tap
Wi-Fi & Bluetooth , and tap Bluetooth On/Off to turn it on.
Is Airplane mode on? Tap Home , tap , tap Settings , tap Wi-Fi
& Bluetooth , and tap Airplane mode On/Off to turn it off.
Is your
Bluetooth
device A2DP compatible? Lynx
Bluetooth
is
compatible with stereo audio streaming devices (A2DP Profile), but is
not compatible with the Hands Free Profile (HFP), which is typically
used for a
Bluetooth
connection to a cell phone.
You may have to set your device into pairing/discoverable mode for
Lynx to find it. Consult the instructions for your device and set it in
pairing/discoverable mode.
Lynx does not find my Wi-Fi
network.
Does the Wi-Fi network have a hidden name (SSID)? If so, You will
have to manually enter the information about the network to connect
to it.
Tap here to learn how to manually connect to a Wi-Fi network.
Are you too far away (out of range) from the Wi-Fi network? Try
moving closer to the wireless access point.
I entered the password for a
Wi-Fi network, but Lynx displays
“Obtaining IP address
…”
for a
long time, and eventually shows
“Disabled”
.
You have probably entered the wrong password for the Wi-Fi network.
Wi-Fi passwords are case sensitive, so be sure you have entered it
accurately.
To re-enter the password, tap+hold the Wi-Fi network name, and
select
Modify network . Tap in the area below Password to display
the on-screen keyboard, and enter the password again.
I entered a static IP address for
Wi-Fi, but Lynx is unable to
connect to Internet Radio.
Did you enter the correct IP information? If even one digit is incorrect
in any of the IP addresses, it may prevent Wi-Fi network
communication. Double check your IP addresses.
Do you have the correct IP address information?
Have you have entered the IP addresses into Lynx correctly?
I entered a static IP address for
my Wi-Fi network, but now Lynx
is unable to connect to any other
Wi-Fi networks.
The static IP address is specific to the Wi-Fi network for which it was
entered. You have to turn off the static IP address before you can
connect to a different Wi-Fi network.
To turn off the static IP address, tap Home , tap , tap
Settings , tap Wi-Fi & Bluetooth , tap Wi-Fi settings , tap Advanced ,
and tap Use static IP to remove the check mark from the check box.
I am having problems connecting
Lynx to my D-Link 600 series
wireless router.
Try disabling the Wireless Multimedia Extensions. Tap Home ,
tap , tap Settings , tap Wi-Fi & Bluetooth , tap Wi-Fi settings , tap
Advanced , and tap Disable Wireless Multimedia Extensions .
It is recommended that you keep the Wireless Multimedia Extensions
enabled if you are not experiencing a problem.