Sirius Satellite Radio TTR1C, User Manual, Page: 67 / 88

67
Appendix: Manual Network Configuration
a.
If you have just turned your SIRIUS TTR1C Internet Radio on for the
first time, the SSID screen will already be displayed . Skip ahead to
step d .
b.
Press MENU and turn the TUNE knob to highlight System Setup .
Press the TUNE Knob .
c.
Turn the TUNE knob to highlight Network . Press the TUNE Knob .
d.
Turn the TUNE Knob to highlight Manual Settings or [Manual
config] . Press the TUNE Knob .
e.
Turn the TUNE Knob to highlight
Wireless . Press the TUNE Knob .
f.
Will you be using DHCP? Turn the
TUNE Knob to highlight DHCP enable
or DHCP disable and press the TUNE
Knob .
g.
If you have selected DHCP disable, enter the following
information . Otherwise, continue with step h .
For each entry, Turn the TUNE knob to select the numbers, and
press the TUNE knob to confirm and move to the next number .
Press BACK if you entered an incorrect number .
TIP! You can use the Remote Control to increment the numbers ( ), and
move forward or backward through the number fields ( + and —) .
i . Enter the IP address to use for the radio .
ii . Enter the Subnet Mask for the network .
Wired
Wireless
>
>
Connection type 1/9