Sirius Satellite Radio SLT976, Installation, Use And Maintenance Instruction

Page: 50 / 52

50
An accurate maintenance guarantees good fun-
ctioning and long-lasting performance. Special
care needs to be taken with the grease filter:
to access the filter, proceed as described in the
PANEL OPENING chapter.
Remove the grease filter, using the special handle.
To refit the grease filter after cleaning, carry out
the same operation in reverse order.
To remove the carbon filter, if fitted, follow the
same steps as for the grease filter.
The carbon filter is located immediately above
the grease filter.
Tepid water and neutral detergents are recom-
mended to clean the appliance, while abrasive
products should be avoided.
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a simi-
larly qualified person in order to avoid a hazard.
Replace led lamp SLT976
To replace the led lamp, remove the lamp (Fig.
31) inserting a screwdriver or another sharp tool
between the lamp and its chro me support and
replace it with a lamp of the same kind.
MAINTENANCE
51