Italy 100 cutter
Use and Maintenance Manual Ver. 1.1
5
f) Unauthorised modifications or operations
g) Use of non-genuine spare parts or not specifically for the model
h) Total or partial inobservance of the instructions
i) Exceptional events.
1.2
G
ENERAL INFORMATION ON MACHINE USE
The aim of this manual is to provide the user with general knowledge of the machine as
well as maintenance instructions to ensure its good functioning.
Before starting any installation, maintenance and repair operations, carefully read this
manual. It contains all the necessary information for proper use of the machine and to
prevent injury. ·
The frequency of the checking and maintenance operations described in this manual is
the minimum necessary to ensure efficiency, safety and a long life of the machine in
normal operating conditions. Nonetheless, you should constantly monitor the machine
and promptly take action in the event of faults. ·
All routine maintenance operations, checks and lubrication must be carried out with the
machine off and disconnected from the energy supplies (electrical and other).
WARNING
Any unauthorised modification or tampering with the machine and its safety
systems relieves the manufacturer of all responsibility in terms of warranty
and safety.
1.3
G
ENERAL PRECAUTIONS REGARDING MACHINE USE
This machine has been designed and constructed to be used according to the standard
rules of conduct when working with machines; the manufacturer therefore takes for
granted that the machine operators are knowledgeable with these rules.
The user is responsible for informing and training the operators and ensuring
that everyone that will be operating on the machine read these instructions.
•
Where a safety key selector or safety key lock is provided, the maintenance
technician or the operator must remove the key and personally pocket it or put
it in safe place where unauthorised staff cannot access it.
•
Do not allow unauthorised staff to operate on the machine.
•
DO NOT START THE MACHINE IF IT MALFUNCTIONS IN ANY WAY
•
Before using the machine, make sure that any dangerous condition has
appropriately been eliminated.
•
Make sure that all the guards and other protections are in place and that all the
safety devices are present and in working order.
•
Make sure that there are no foreign objects in the operating area.
•
When there is a risk of being hit by projecting or falling solid parts or similar,
wear goggles with side shields, a hard hat and gloves if necessary.
•
Personal protection devices must be used where prescribed.
