Italy 100 cutter
Use and Maintenance Manual Ver. 1.1
4
1 Introduction
IMPORTANT
BEFORE CARRYING OUT ANY OPERATIONS ON THE MACHINES, THE TRAINED
OPERATORS AND TECHNICIANS MUST CAREFULLY READ THE INSTRUCTIONS
CONTAINED IN THIS MANUAL (AND IN THE ATTACHED DOCUMENTS) AND
FOLLOW THEM WHILE CARRYING OUT THE VARIOUS OPERATIONS.
IF YOU HAVE ANY DOUBTS CONCERNING THE INTERPRETATION OF THESE
INSTRUCTIONS, CALL OUR TECHNICAL SERVICE FOR HELP.
1.1
G
ENERAL
This instruction manual refers to:
MACHINE TYPE:
ITALY 100
SERIES AND TYPE:
........
YEAR OF MANUFACTURE:
20....
This manual contains the main information on storage, transport, installation, use,
supervision and maintenance of the machine. This manual forms an integral part of the
machine and must be kept throughout its lifetime for future consultation.
If your copy of the manual becomes unreadable, ask the manufacturer for a new copy:
SIRI SRL
Via R. Dalla Costa 44/46
41122 MODENA (ITALY)
Tel. 059/313191 - Fax 059/311362
E-mail: [email protected] - http//www.SIRI.mo.it
MEMBER OF THE EXPO CONSORTIUM - MODENA
specifying the machine type and the serial or order number printed on the machine
identification plate.
THE OFFICIAL LANGUAGE CHOSEN BY THE MANUFACTURER IS ITALIAN.
The manufacturer shall not be held liable for translations into other languages which do
not match the source language and meaning.
This manual reflects the machine status at the time it is supplied and cannot be
considered inadequate if updated following new experience.
SIRI
reserves the right to
update the manuals without any obligation to update earlier versions or to informusers
of machines supplied previously. All proposed updates to the manual and/or the
machines shall be considered provided for information purposes only.
Should you need any information on machine updates, SIRI Customer Service will
gladly help you.
SIRI is relieved of all responsibility for improper use of the machine, for example:
a) Use by untrained staff
b) Use not in compliance with the regulations in force
c) Incorrect installation
d) Power supply defects
e) Poor maintenance
