Siqura HSD620PRH, Installation Manual, Page: 26 / 42

Siqura HSD620PRH/621PRH
Page 22
Mini wall mount Mini wall mount with secured cable entry plate
6.4.2 Wall mounting with gooseneck tube
The following figure shows how cables run through the tube.
Gooseneck with recessed (left) and exposed (right) cabling
Items Needed

Dome camera

Gooseneck tube and other equipped items (optional accessory)

Waterproof boot (standard accessory with the indoor tube adaptor)

Screws and screw anchors (not supplied)

Indoor tube adaptor for the Siqura HSD620PRH and HSD621PRH (optional accessory)
Tools Needed

Drill

Screwdriver

To mount the dome with the gooseneck tube
1. Make a cable entry hole in the wall to recess the cables. Otherwise, cables can be threaded
through the cable entry hole on the mount.
2. Thread the cables through the mini wall mount and out through either the cable entry hole
in the wall or the hole in the mini wall mount.
3. Fix the gooseneck tube to the wall with proper screws and screw anchors.
4. Attach the waterproof boot to the gooseneck tube.
5. Thread the cables through the gooseneck tube and the tube adaptor and lock it to the mini
wall mount with the supplied screws and washers.
At this point, the dome can be suspended from the mini wall mount using the safety wire.