Siqura HSD620PRH, Installation Manual, Page: 25 / 42

Dome Installation
Page 21
Note: After threading the cables, block the cable entry hole with the supplied sponge(s) to
prevent insects from entering the tube.
6. Fix the outdoor tube adaptor to the straight tube with the supplied screws and washers.
Then adjust the waterproof boot to the junction of the straight tube and the outdoor tube
adaptor.
7. Connect the cables to the dome camera. Then attach the dome to the outdoor tube adaptor
and fix them with the supplied screw.
6.4 Wall Mount
There are three types of wall mounts for the Siqura HSD620PRH and HSD621PRH dome camera.

Mounting with a mini wall mount, as shown in the section Mini wall mount.

Mounting with a gooseneck tube, as shown in the section Wall mounting with gooseneck
tube.

Mounting with a wall box, as shown in the section Wall box mounting.
6.4.1 Mini wall mount
Items Needed

Dome camera

Mini wall mount and other equipped items (optional accessory)

Screws and screw anchors (not supplied)

Indoor tube adaptor for the Siqura HSD620PRH and HSD621PRH (optional accessory)

Waterproof boot (supplied with the indoor tube adaptor)
Tools Needed

Drill

Screwdriver

To mount the dome with the mini wall mount
1. Make a cable entry hole in the wall to recess the cables. Otherwise, cables can be threaded
through the cable entry hole on the mount.
2. Thread the cables through the mini wall mount and out through either the cable entry hole
in the wall or the hole in the mini wall mount.
3. Fix the wall mount to the wall with proper screws and screw anchors.
4. Attach the waterproof boot to the mini wall mount.
5. Thread the cables through the tube adaptor and lock it to the mini wall mount with the
supplied screws and washers.
At this point, the dome can be suspended from the mini wall mount using the safety wire.
6. Block the mount's cable entry hole.
If the cable is threaded into the wall, block the hole in the mount with the supplied plate.
If the cable is threaded through the neck of the wall mount, block the cable entry hole with
the supplied sponge(s) to prevent insects from entering the tube.
7. Attach the lock screw plate to the dome plate with the supplied screw, as depicted in the
section Ceiling mounting with a straight tube.
8. Adjust the waterproof boot to the junction of the mini wall mount and the indoor tube
adaptor.
9. Connect the cables to the dome camera. Then attach the dome to the indoor tube adaptor
and fasten them together with the supplied screw.