SIQENS Ecoport 800
Correct use
Page 1 of 49
1.
Correct use
The SIQENS Ecoport is a methanol fuel cell system for automatic power supply of 24V or 48V
batteries with up to 800W. Within the scope of installation and use, please note the following:
▪
The equipment may only be used to charge batteries that comply with the technical
specification of the device (
3.2. Technical data
). When setting the voltage thresholds of
the respective battery type, follow the manufacturer's recommended values or contact
SIQENS technical support.
▪
The devices are designed for power or backup power supply under the environmental
conditions specified in these operating instructions.
▪
Industrial methanol (IMPCA, > 99.85%) must be used for operation. This may be
purchased from SIQENS or chemical suppliers and distributors. Methanol or methanol-
water mixtures that do not comply with the enclosed specification (
) may only be used after prior consultation with SIQENS.
▪
The devices are designed for commercial use. Installations for private use or in vehicles
are only permitted after consultation with SIQENS or an authorized partner company.
▪
For installations in vehicles, it must be ensured that the device is not operated while the
vehicle is in operation.
▪
The devices are not intended for use as an emergency power supply for medical and life-
support equipment.
▪
Units may be connected in parallel to increase the charging current. A series connection
to increase the voltage is not permitted.
