SIQENS Ecoport 800
Installation
Page 23 of 49
NOTICE
To protect the battery from deep discharge, the Ecoport will not start if the
battery voltage is below 22.0 V / 44.0 V. Before starting, the battery must be
charged externally (e.g. via a battery charger or generator).
1.
Connect battery cable to Ecoport
Insert the battery cable into the battery plug of
the Ecoport.
Make sure that the cable is firmly seated and fully
latched in place.
2.
Connect battery cable to battery
The red contact of the battery cable must be
connected to the positive pole (+) of the battery.
The black contact of the battery cable must be
connected to the negative pole (-) of the battery.
As soon as a voltage is present, the fans of the
Ecoport start a function check.
NOTICE
Pay attention to the polarity when connecting the cables
+
-
