SIQENS Ecoport 800
Operation
Page 30 of 49
Next, set the switch-on voltage.
Confirm your selection by clicking
"Apply".
Then select the upper voltage
threshold under "Settings" in the
"Battery" menu item. Once the
battery reaches this voltage, the
Ecoport will stop charging.
Recommended values for the upper
voltage threshold of various battery
types are already specified in the
control panel. Additional end charge
voltages can be set by the user.
NOTICE
Do not select the start voltage threshold too low. Approx. 200 Wh of electrical
energy from the battery are required to start the Ecoport. Further information on
the starting behavior can be found under
ergy consumption during startup
To protect the battery from deep discharge, the Ecoport will not start if the
battery voltage is below 22.0 V / 44.0 V. Before starting, the battery must be
charged externally (e.g. via a battery charger or generator).
