SIP B16-16 Manual Download Page 17

Congratulations upon your new SIP purchase.
We thank you for having purchased SIP equipment

All SIP equipment has been designed, manufactured, tested and quality controlled to be complete and free of
manufacturing defects in order to provide long trouble free service.

In the unlikely event that difficulties should be experienced with your new purchase, please refer to the enclosed
instruction manual prior to contacting the SIP stockist from which the purchase was made. If the stockist is unable to
rectify the problem encountered, they will contact us directly on your behalf.

In order to solve your problem quickly, you will need to provide the following information.

1.

Type and model of product purchased.

2.

Proof of purchase indicating date and supplier.

3.

Use for which product is tasked.

4.

Problem encountered.

With this data we will always endeavour to find a prompt resolution.

ENVIRONMENT

We believe that the protection of the environment is of paramount importance, not only on a day to day basis but
also for our future generations. Please take the time to read this and make yourself aware of the environmental issues
related to the product which you have purchased so that you may also contribute towards the protection of our future.

1) Please dispose of the packaging for the product in a responsible manner. It is suitable for recycling. Help to
protect the environment, take the packaging to your local amenity tip and place it in the appropriate recycling bin.

2) If the product you have purchased requires oil changes to be carried out as part of the normal maintenance
schedule please ensure that the waste oil is disposed of in a responsible manner. Under Section 111 of the Water
Industry Act 1991 it is an offense to contaminate a drain or public sewer with oil. Most local amenity tips have oil
disposal facilities. Please use them.

3) When the product you have purchased has reached the end of its useful service life or if  you dispose of it for
another reason, give consideration to the fact that the product does contain recyclable materials. Most local  amenity
tips have facilities to recycle these materials.  Please use them.

Thank you for protecting the environment for yourself and future generations.

QUALITY AND ENVIRONMENT DEPARTMENT

SIP (INDUSTRIAL PRODUCTS) LTD

SIP (Industrial Products) Limited
Gelders Hall Road
Shepshed
Loughborough
Leicestershire
LE12 9NH
England

Summary of Contents for B16-16


















Reviews: