8
1. Locate the two leg stands.
2. Connect both leg stands to the bottom base using the four M12 x 25 bolts with 4 x
12mm washers and 4 x 12mm spring washers supplied.
3. Fit the four castors to the ends of the leg stands using the M12 domed nuts with
12mm washers & 12mm spring washers supplied.
4. Ensure all bolts and nuts are fully tightened.
5. Slide the saddle over the top of the main piston.
Below is a picture of how the transmission jack should look after assembly.
ASSEMBLY INSTRUCTIONS
GETTING TO KNOW YOUR TRANSMISSION JACK
1
2
3
4
5
6
6
7
1.
Saddle
2.
Release Valve
3.
Piston
4.
Oil Filler / Air Vent screw
5.
Foot Pedal
6.
Leg Stand
7.
Castor
13
EXPLODED DRAWING
