10 | Sinterit SANDBLASTER XL User Manual
Average power consumption
6 [W]
Max. pressure
8.6 [bar] (125 [psi])
Working pressure
5.0-8.6 [bar] (72.5-125 [psi])
Min / Max air consumption
(suggested air compressor
parameter)
290 [l/min]
ABRASIVE MATERIAL
Type
Glass balls
Size of material
200 [μm]
Abrasive material
container capacity
10 [kg] (22 [lbs])
SAFETY
Certificates
CE
5. Initial startup of the Sinterit SANDBLASTER XL after delivery
1. Remove all the solid protective packaging.
2. Gently pull out the Sinterit SANDBLASTER XL and other accessories.
3. Remove the bubble wrap and place the machine on a stable surface.
4. Check the leveling of the sandblaster. In case of problems, correct with Adjustable mounting feet
16
.
5. Take from the box with additional equipment: Power supply
A
, T-type push-in pneumatic fitting
B
, Pneumatic
quick coupler
C
, Air Blow Gun
D
.
6. Unlock the two sandblaster door locks
7
and open the door
10
.
Remove from inside:
•
Transport protection
•
Pneumatic tubings
L
,
M
•
Contol pedal’s pneumatic tubings
J
•
Control pedal
K
•
Replaceable PE protective foils
N
•
Spare Protective Rubber Gloves
O
Check the fitting and tightness of:
•
Protective Rubber Gloves
6
•
Inner Pneumatic tubings
21
,
23
•
Static Nozzle
19
•
Air filter
17
•
Door gasket
11
7. Plug the Power supply
A
into the sandblaster Power socket
12
.
8. Remove the transport protection (plastic cable ties) from the Inner Air blow gun
20
.
9.
Connection of the compressor and external Air Blow Gun (Image 5):
a. Connect the T-type push-in pneumatic fitting
B
to the Pneumatic inlet nipple
14
, and then, on both sides, the
Pneumatic tubings
M
,
L
.
b. Plug the Air blow gun
D
into the left tubing and the compressor into the right tubing. REMEMBER: the
compressor is not included in the Sinterit SANDBLASTER XL set.
