Sinterit SANDBLASTER XL User Manual | 15
7. Maintenance of the Sinterit SANDBLASTER XL
WARNING!
Before replacing the accessories or beginning the assembly, repair, transport, or
any form of maintenance, disconnect the Sinterit SANDBLASTER XL from the
compressor, turn off the machine and unplug it from the power source.
Check before each use:
1. Check the sandblaster chamber
9
previous to each use for damaged and/or deformed parts.
2. Check all pneumatic tubings for wear and tear and check if the Static Nozzle
19
and Inner Air Blow Gun’s nozzle
20
are not too worn.
3. Check if the Air filter
17
works well, clean it if necessary, finally, also check if the door
10
still close properly (check
the door gasket
11
).
4. Clean the window (outside and inside) and the parts of the sandblaster with a soft cloth. Do not use any solvents
for cleaning!
5. Avoid allowing moisture into the abrasive material, as it may cause clogging of the nozzles.
6. In case of a malfunction/defect, do not use the sandblaster until it has been repaired.
A. REPLACEMENT OF THE ABRASIVE MATERIAL
1. In case the Abrasive material is clotting, this means there is moisture in the compressed air or there is moisture/
oil in the system. This leads to clogging and an uneven spray.
2. It could also be that there is too much debris in the Abrasive material, this can be solved by filtering/replacing it.
3. When the spray is often disrupted, place a thumb (WITH PROTECTIVE RUBBER GLOVES ON) over the Static Nozzle
19
and (press firmly) and depress the Control pedal
K
for a few seconds. Now the air blows back into the suction
pneumatic tubing, which can dissolve possible obstructions.
STOP!
The user is responsible for disposing of used Abrasive material in accordance with
applicable laws.
EXCHANGE OF ABRASIVE MATERIAL WITH SINTERIT ATEX VACUUM CLEANER
To remove the used Abrasive material from the inside of the sandblaster we recommend using Sinterit ATEX Vacuum
Cleaner.
Image 8. One way to remove used Abrasive material is to use the Sinterit ATEX Vacuum Cleaner.
