Sinoboom AB14EJ, Operation Manual

Page: 10 / 94

© Aug 2020 ii GTZZ14EJ&16EJ Operation Manual
Testing the turntable rotate function 6-8
Testing the platform level fuction. . . . 6-8
Testing the platform rotate function . 6-8
Testing the jib up/down function . . . . 6-8
Testing speed regulating function. . . 6-8
Testing the rear detection fuction . . . 6-8
Testing the reverse drive function. . . 6-9
Testing the buzzer function . . . . . . . . . 6-9
Testing the system distress alert
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Testing the overload alert function . . 6-9
Testing the tilt alart function . . . . . . . . . 6-9
Testing battery level indicator . . . . . . . 6-9
Testing petrol generator (if
equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Testing charge indicator (if petrol
generator is equipped). . . . . . . . . . . . .6-10
Testing the work lamp (if equipped)6-10
Testing the Drive Speed. . . . . . . . . . . . . .6-10
Testing the Emergency Lowering
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-10
Testing the Tilt Protection System. . . . 6-11
Testing the Weighing System . . . . . . . . 6-11
7 Operating the Machine ......... 7-1
Stability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Emergency Stop . . . . . . . . . . . . . . . . . . . . . . 7-3
Emergency Lowering . . . . . . . . . . . . . . . . . 7-4
Emergency Operating. . . . . . . . . . . . . . . . . 7-4
Emergency Towing/Dragging . . . . . . . . . 7-4
Operation from Ground . . . . . . . . . . . . . . . 7-5
Operation from Platform . . . . . . . . . . . . . . 7-6
Driving on a Slope. . . . . . . . . . . . . . . . . . . . . 7-7
Charging the Battery . . . . . . . . . . . . . . . . . . 7-8
8 Transporting and Lifting the
Machine ........................... 8-1
Lifting the Machine with a Crane . . . . . . 8-2
Transporting the Machine . . . . . . . . . . . . . 8-3
9 Decals/Nameplates Inspection 9-1
Decals/Nameplates (GB)-
GTZZ14EJ . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
Decals/Nameplates (CE)-
GTZZ14EJ . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
Decals/Nameplates (AS)-
GTZZ14EJ . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8
Decals/Nameplates (KCS)-
GTZZ14EJ . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
Decals/Nameplates (GB)-
GTZZ16EJ . . . . . . . . . . . . . . . . . . . . . . . . .9-14
Decals/Nameplates (CE)-
GTZZ16EJ . . . . . . . . . . . . . . . . . . . . . . . . .9-17
Decals/Nameplates (ANSI)-
GTZZ16EJ . . . . . . . . . . . . . . . . . . . . . . . . .9-20
10 Maintenance .................... 10-1
Conducting a Pre-delivery Inspection 10-1
Following a Maintenance Schedule . .10-2
Completing a Repair & Inspection
Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2
Appendix 1: Symbols and
Description....................... A-1
Appendix 2: Prepare the Work
Record Before Delivery ....... A-3
Appendix 3: Repair & Inspection
Report ............................. A-5